+(65) 6862 5225
7 Joo Koon Crescent Singapore 629024
Stay connected:
Generator Rewinding, Generator Rewinding Singapore

The Standard Procedure Of Work Equipment Inspection

From time to time, you will need to inspect your work equipment and identify if there any issues preventing the equipment from operating at its best performance.

Besides making sure of that fact, you also want to ensure that you detect any deterioration before it leads to a health and safety risk, resulting in damaged equipment and injured staff.

With the many reasons that explain why one should consistently inspect their work equipment, it makes even more sense to understand the inspection process completely.

What You Can Do

Before you decide that you need to do motor servicing or generator rewinding, you can take the initiative to do a little inspection on your own and here’s how you can do it:

  • Risk Assessment: With this quick test, you will be able to identify any potential risk to your equipment and understand the measures you can take to resolve this matter.
  • Record The Results: Keep track of your equipment’s health condition so you can compare the results from time to time. You can choose to have the records written down or typed out in a digital document, just make sure you keep them secured and stored safely.
  • Know When To Use The Equipment: Once you have identified the issue, assess whether the equipment can still operate normally or leave it on its own until you have someone called over to fix the problem.
  • Pass The Inspection Report To A Professional: When necessary, hand the inspection reports of your equipment to an experienced engineer or mechanic so he or she will understand what they must do to restore your equipment into its original condition.

What Happens During The Inspection

Regardless of whether you are a beginner or amateur when it comes to the inspection of work equipment,

  • Quick Checks: Once you have installed the equipment, you should do several quick checks before you start using it. So as to make sure your equipment is safe and ready for use.
  • Regular Checks: Be consistent with your checks because you will want to make sure that your equipment is operating properly without any issues at all times.
  • Thorough Examinations: Don’t just run a simple examination, you will want to make sure you get every component of your equipment checked properly so that you don’t miss out on any error in your machine.

How Often Should You Inspect The Equipment

  • Environmental Conditions: The harsher the environmental condition, such as harsh outdoor conditions will require you to do more frequent inspections.
  • Results Of Risk Assessment: After you have done your first few risk assessments, you can roughly tell if you need to give your equipment more attention and inspection checks.
  • Look At The Inspection History: From your past inspection tests, you should carefully compare each one of them and check your equipment’s condition. From the deterioration to any component failure, you can see if more checks would be needed.

Who Should Do The Inspection

Just about anyone with sufficient experience and knowledge should be able to do the job of inspecting your work equipment. Check with your manufacturer, get advice from the industry and make use of your own experience of the equipment to find out who is the suitable engineering company that will provide you with the service that you are looking for.

The hired engineer or mechanic should be able to provide you with basic services like generator overhauling, basic installation of equipment, upgrading of equipment and so on.

Leave a Reply